When you customers ask for trench coats, the procedure is different than for usual garments. In this document, you will be able to see the two designs that you can ask for along with the different sizes available (please request that we give you access to it by writing to help@mtm.design).


Basically, you have access to :

  • GEBBL04: a "normal" trench coat with set-in sleeves.
  • GEBBL05: a trench coat with raglan shoulders.


When it comes to placing orders, here is how to proceed:

  • Create an overcoat in the Studio.
  • Select the fabric, half canvas make, buttons, lining and monogram only.
    • Important: The following overcoat buttons DO NOT have the appropriate 40L size for trench coats and cannot be used: 18B-059, 18B-060, 18B-066, 18B-067, 18B-068, 18B-087 and 18B-088.
  • Check the "special request" option at the end of the designing section, or click on the bell button directly from the cart.
  • Order the item (no need to put the item on hold).
  • Pick the appropriate size # based on the trench coat model selected and your customer's measurements (select the size based on the above document). Some measurements can be customised within certain ranges.
  • Go to Remarks and fill the information below (copy-paste into a Remark):
    • Please change the design to: GEBBL04 or GEBBL05 (select based on this document).
    • Desired size: i.e. 175/100A.
    • Indicate any measurement modifications you would like to make (within the accepted range). For example:
      • Stomach: XX" (if different from default value).
      • Shoulder: XX" (if different from default value).
      • Sleeve length: XX" (if different from default value).
      • Back length: XX" (if different from default value).
      • Etc.