To select a contrast for your fabric design.
In this example, we'll add a tuxedo stripe on pants but the steps are all the same on all garments.
Follow these steps:
1. Go to the Contrast Tab
Open the contrast tab in the system to begin.
2. Search for Your Fabric
Use the search bar to locate the fabric you want. Once found, select it.
After selection, the fabric's availability for contrast use will be confirmed by an image or indicator, as shown here:
3. Choose the Contrast Area
Select the part of the garment where the contrast will be applied, such as the leg stripe or waistband. Visual icons are provided for each contrast area to guide your selection.
4. Apply the Previously Selected Fabric to the Contrast Area
Click on the fabric selected in step 2 to apply it to the chosen contrast area. Once applied, the fabric number will appear under the designated area, confirming the selection.
You can verify that the contrast was correctly selected by checking the Summary page, where the details will be displayed.