To add a pair of custom jeans:
1. Go to Add Item in the cart and choose Jeans.
2. Build your design.
3. Add measurements (see below).
When ordering jeans without try-ons, follow these steps to ensure proper fit:
1. Select Cut
Choose the cut first—this sets allowances for seat, thigh, and knee. Always keep the customer’s proportions and overall look in mind.
2. Length (Left/Right)
- Measure from top of side waistband along outseam to desired end.
- Jeans are worn longer than trousers—add 0.5"–1" (more if rolled hems are preferred).
3. Seat
- Measure the fullest part of the seat, keeping the tape level.
- The cut adds allowance automatically.
- Go tighter than trousers: subtract ~0.5" from thigh measurement.
4. Waist
- Measure where the jeans will sit.
- Jeans stretch—subtract ~0.5" from trouser waist.
5. Rise (U-Rise, Front, Back)
- This is different than normal trousers; you have to input a front and back rise.
- Measure from front waistband, between legs, to back waistband.
- Regular ratio = 40% front / 60% back. Adjust for low or high waist.
6. Thigh
- Measure fullest part of thigh.
- Subtract ~1" from trouser thigh measurement.
- Allowance varies by fabric and fit preference.
7. Knee
- Measure calf circumference, then add +1.5".
- Ensure final knee width can clear thigh just above the knee.
8. Bottom Opening
- Modern jeans: 12–14" opening.
- Go wider for traditional styles or heavier builds.
** Note: Grey fields in the order form are optional, not required.